The HPI Savage is one of the best-known monster trucks in RC, and it has grown into a whole family: the Savage X, Savage XL, Savage XS, and electric Flux, nitro and gas versions of each. That's why "will this part fit my Savage?" is one of the most common questions we get. This guide explains the Savage models, which parts they share, and the upgrades and spares worth buying for a Savage X or XL.
Savage X, XL and XS: what's the difference?
- Savage X: the 1/8 scale 4WD monster truck most people picture. It has come as the nitro Savage X 4.6 and the electric Savage X Flux, now in V2 form with the GT-6 body.
- Savage XL: the longer XL-length version of the 1/8 platform. It has come as the electric Savage XL Flux and the gas-powered Savage XL Octane, which uses a spark plug and ignition system instead of glow fuel.
- Savage XS: the small 1/12 scale Savage, with its own parts. Savage XS parts do not fit the X or XL.
Many shock, sway bar and differential parts are shared between the Savage X and XL. Chassis, body and drive shaft lengths often aren't, because the XL is longer. Every product on our site names the models it fits in the title, so check that first.
The current trucks: Savage X Flux V2 and Savage XL Flux V2
The HPI Savage XL Flux V2 GTXL-6 is a 1/8 scale 4WD brushless monster truck that arrives ready to run with a 2.4GHz radio. It uses a Flux MLH 2200KV brushless motor and a waterproof Flux ELH-6S 150A ESC, and runs on 4S (two 2S packs) or 6S (two 3S packs) LiPo. The V2 adds a low center-of-gravity XL twin vertical plate chassis, a center gearbox with an oil-filled differential, twin battery boxes, 17mm aluminum hex hubs and Tredz Terrahex tires on 3.8 inch Havok wheels.
The HPI Savage X Flux V2 GT-6 is the shorter Savage X version, also a 1/8 scale 4WD brushless RTR with shaft-driven 4WD, long-travel suspension and a 2.4GHz radio, wearing the GT-6 body.
Best Savage X and XL upgrades
17mm hex hub conversion
Older Savage trucks use a smaller wheel hex. HPI's 17mm hex hub conversion sets move your truck to the 17mm standard used on most high-performance 1/8 scale trucks. That puts less stress on the wheels, helps stop stripped wheels on powerful setups, and opens up many more wheel choices. There's a Savage XL 17mm hex hub conversion set and a separate set for the Savage X, plus aluminum 17mm hex hubs for both.
Big bore shocks
The HPI Big Bore Sport Shock Set comes assembled and fits the Savage X and XL. The larger bore holds more oil, so damping stays more consistent and fades less over a long bash session. For rebuilding stock shocks, HPI also lists Savage X/XL shock parts sets, 3.5x90mm shock shafts and shock cap sets.
Bulletproof differential gears
Diff gears take a beating on a powerful Savage. HPI makes its Bulletproof 29T/9T bevel gear sets in three versions: sintered, machined and forged. Replacing worn diff gears with a Bulletproof set keeps a hard-run Savage going.
Wheels, sway bars and wheelie bars
Other popular upgrades include the front and rear sway bar set for the Savage X/XL, Havok 3.8 inch wheels for the Flux V2 and 4.6 GT-6, Warlock and Blast wheels for the Savage X, and the Savage Wheelie Bar V2. Hot Racing and Robinson Racing also make Savage upgrades, including a Robinson 46T hardened steel spur gear for the Savage X 4.6.
Bodies
A fresh body changes the whole look of a Savage. For the X and XL, we stock clear shells to paint yourself, like the 1979 Ford F-150 and the Ford F-150 SVT Raptor, and pre-painted GT-6 Sportcab bodies. For the XL, the GTXL-1 vintage clear truck body and the GTXL-1 pre-painted body for the XL Flux are popular picks.
Spare parts to keep on hand
- Flux trucks: spur gears (the XL Flux uses a 43T spur with a twin slipper clutch), slipper pads, bumpers and center skid plates
- Nitro and Octane trucks: clutch shoes and springs, clutch bells, air filter foams, brake disks and, for the Octane, spark plugs
- All Savages: shock parts, servo saver springs, lower arm braces and drive shafts
You'll find every one in our HPI Savage parts and upgrades collection, with more in HPI Racing parts and RC monster trucks.
Quick answers
Do Savage X parts fit the Savage XL?
Many do, including the shock parts, shock shafts, big bore shocks and sway bars. Parts tied to the chassis length, like drive shafts and some bodies, are model-specific, so check the product title.
Do Savage XS parts fit the Savage X?
No. The XS is a smaller 1/12 scale truck with its own parts.
What battery does the Savage XL Flux V2 use?
It runs on 4S (two 2S packs) or 6S (two 3S packs) LiPo, one pack in each battery box.
What's the best first upgrade for a Savage X or XL?
For older trucks, a 17mm hex hub conversion and big bore shocks make the biggest difference. On a hard-run truck, add Bulletproof diff gears.
Where can I find every Savage part you sell?
In our HPI Savage parts and upgrades collection, which lists every Savage part in one place.







