Description
Unlock the ultimate performance of your Reflex Racing FX28 with a 1up Racing Pro Duty Titanium Upper Screw Set. This upgrade not only ensures exceptional durability but also significantly reduces weight compared to traditional steel screws, granting your Reflex FX28 a distinct advantage on the track by lowering the center of gravity.
The 22 piece upper screw set is all you need to completely deck out the top-side of your FX28 with top-tier titanium hardware!
Many titanium products on the market come from the same two factories in China, where custom finishes often take precedence over material quality. 1up Racing took a different path - spending years carefully sourcing premium materials and trusted partners to develop the Pro Duty Titanium line. These components are custom made to their specs in Taiwan, using top-tier 6AL4V Grade 5 titanium to ensure strength and reliability. When performance matters most, you can trust 1up Racing Pro Duty Titanium to deliver - every time.
Installation Note: 1up Racing recommends using Genuine MIP 1.5mm Hex Driver Wrenches for the best hex engagement and fit. The majority of screw/hex failures they see is caused by over-tightening during installation. If you're having issues with screws backing out be sure to use a thread locker rather than cranking these down super tight. This ensures the hex will stay in excellent condition and your Pro Duty screws can be used over and over again for years to come.
Use your kit steel screws at the bottom of the chassis. Using titanium screws at the bottom would raise the car's CG and reduce stability and corner-speed. While alternatives like brass or tungsten screws are available, they've found that they are either too soft and break easily, or so rigid they reduce chassis flex and negatively affect handling.
The 22 piece upper screw set is all you need to completely deck out the top-side of your FX28 with top-tier titanium hardware!
Many titanium products on the market come from the same two factories in China, where custom finishes often take precedence over material quality. 1up Racing took a different path - spending years carefully sourcing premium materials and trusted partners to develop the Pro Duty Titanium line. These components are custom made to their specs in Taiwan, using top-tier 6AL4V Grade 5 titanium to ensure strength and reliability. When performance matters most, you can trust 1up Racing Pro Duty Titanium to deliver - every time.
Installation Note: 1up Racing recommends using Genuine MIP 1.5mm Hex Driver Wrenches for the best hex engagement and fit. The majority of screw/hex failures they see is caused by over-tightening during installation. If you're having issues with screws backing out be sure to use a thread locker rather than cranking these down super tight. This ensures the hex will stay in excellent condition and your Pro Duty screws can be used over and over again for years to come.
Use your kit steel screws at the bottom of the chassis. Using titanium screws at the bottom would raise the car's CG and reduce stability and corner-speed. While alternatives like brass or tungsten screws are available, they've found that they are either too soft and break easily, or so rigid they reduce chassis flex and negatively affect handling.
Includes:
- M2 LowPro Screws to replace all of the M2 button head screws on the top-side of the car
- M2 Flat Head Screws replace their steel counterparts in all placements on the top-side of the car
You may also like
Recently viewed
No reviews