The Castle Creations Direct-Connect Sensor Wire streamlines installation by eliminating the need for a sensor harness adapter. The ROAR sensor plug connects directly to any sensored motor, and the other end seamlessly plugs into any Castle waterproof, sensored-capable ESC. Keep your connections clean with this innovative product!
Compatible ESCs:
- Mamba Micro X
- Mamba Micro X2
- Mamba X
- Mamba Monster X
- Mamba Monster X 8s
- Mamba XLX2
- Copperhead 10
Installation:
- Mamba Micro X:
- Unplug existing sensor harness (or dust cover) from ESC.
- Plug in new direct connect sensor wire; mind the orientation by aligning the white wire to the corresponding white dot on the side of the ESC.
- Mamba X:
- Remove 2 screws beside capacitors, using 1.5mm hex.
- Remove wire harness retainer.
- Unplug existing sensor harness from ESC.
- Plug in new direct connect sensor wire; mind the orientation by aligning the white wire to the corresponding whit dot on the side of the ESC.
- Reinstall wire harness retainer and screws.
