Overview
The Racers Edge Q-World 1/8 Buggy and Truggy Starter Box (previously known as the highly regarded OFNA 10244) is a compact, dual-motor electric starter box configurable for use with most 1/8 scale off-road truggies and buggies. Designed to be powered by two 7.2V NiMH stick packs with standard connectors, or by a 12V gel cell using the included adapter, most racers swap to T-Plug or XT60 connectors and run a 3S or 4S LiPo battery for stronger, faster cranking.
The starter box arrives 80% pre-assembled — only final configuration to your specific vehicle is required. Includes everything you need except batteries.
Key Features
- Compact design with built-in handle
- Dual 775-size electric starter motors
- Adjustable front chassis support
- Configurable for most 1/8 scale buggies and truggies
- 80% pre-assembled out of the box
- Power options: 2x 7.2V NiMH, 12V gel cell, or 3S/4S LiPo (with connector swap)
- All hardware and pegs included
Performance Benefits
- Reliable starts for nitro 1/8 scale vehicles
- Twin-motor design provides high cranking torque
- Adjustable support fits a wide range of chassis
- Compact and portable for the pits
Usage Notes
- Best used with: nitro 1/8 scale buggies and truggies (Mugen, Tekno, Losi, Kyosho, HB, Agama, OFNA, and similar)
- For best performance, swap connectors and use a 3S or 4S LiPo pack.
- Engage the starter only as long as needed to start the engine — extended cranking can overheat the motors.
Technical Specs
- Length: 318mm (12.5")
- Width: 121mm (4.75")
- Height: 76mm (3")
- Motors: Dual 775-size electric
- Power Input: 2x 7.2V NiMH stick packs / 12V gel cell (adapter included) / 3S-4S LiPo (with connector swap)
Fitment
- 1:8 scale RC vehicles (1:8 All)
What's Included
- (1) Q-World 1/8 Starter Box (80% pre-assembled)
- Dual 775-size electric motors
- Adjustable front chassis support
- 12V gel cell power adapter
- All required pegs and hardware
Needed to Complete
- Power source: (2) 7.2V NiMH stick packs, OR a 12V gel cell, OR a 3S/4S LiPo pack with appropriate connector
- (Optional) T-Plug or XT60 connectors and basic soldering supplies if upgrading from the included connectors
- (Optional) Standard hex tools for final configuration
Summary
- Compact dual-motor starter box for 1/8 scale nitro buggies and truggies
- Twin 775-size starter motors
- Multiple power input options
- 80% pre-assembled
- Includes all hardware
