Overview
The Racers Edge Female XT60 to 5mm Bullet adapter lets you run a battery pack fitted with an XT60 plug on electronics wired for 5mm bullet connectors, with no soldering and no permanent changes to either side.
It comes pre-wired on a 150mm lead, which is long enough to route neatly through a chassis without the adapter body sitting right on top of the ESC or battery tray. Keep one in the pit box and mismatched connectors stop being a reason to sit out a run.
Key Features
- Female XT60 input to 5mm bullet output
- 150mm pre-wired lead
- No soldering or rewiring required
- Reversible - unplug it and both sides are back to standard
Performance Benefits
- Lets one battery collection serve vehicles with different connector standards
- Avoids cutting and re-soldering factory ESC and battery leads
- 150mm of wire allows tidy routing instead of a tight, strained joint
- Bullet connectors give a large contact area for high-current use
Usage Notes
- Check polarity before the first connection
- Push both ends fully home so the contacts seat completely
- Insulate or cap bare bullets when the adapter is not in use
- Keep total wire length as short as practical for best voltage delivery
Technical Specs
- Brand: Racers Edge
- Item No.: RCE1695
- Input: Female XT60
- Output: 5mm bullet connectors
- Wire Length: 150mm
What's Included
- (1) Female XT60 to 5mm bullet adapter lead, 150mm
Fitment
Compatible RC vehicles: Universal - any RC vehicle, ESC or charge lead using an XT60 battery plug with 5mm bullet connectors on the other side.
Summary
- Bridges XT60 batteries to 5mm bullet electronics instantly
- Pre-wired 150mm lead, no soldering
- Fully reversible, so nothing is modified permanently
- An inexpensive fix for a very common connector mismatch
