Overview
Tekno RC's droop screws make it a breeze to set droop on your vehicle. A 2.0mm hex is machined into the shank end for easy adjustment, and a normal 2.5mm hex sits in the button head. That dual-hex design is the whole trick: you can turn the screw from either end, so you are no longer fighting for tool access with the arm in the way.
Tekno notes they are compatible with virtually all 1/8 scale vehicles, including Tekno's own platforms. The set contains eight M4x10mm screws, which covers all four corners with spares.
Key Features
- M4x10mm droop adjustment screws, eight per set
- 2.0mm hex machined into the shank end
- 2.5mm hex in the button head
- Adjustable from either end of the screw
- Compatible with virtually all 1/8 scale vehicles
Performance Benefits
- Makes droop changes fast enough to try between heats
- Lets you reach the screw without pulling the arm or shock
- Consistent screws mean left and right corners match
- Encourages actually tuning droop rather than leaving it alone
Usage Notes
- Use a droop gauge for repeatable, measured settings
- Set the same droop on both sides of each axle
- Confirm the screw does not bottom out before the arm reaches its limit
- Use a quality 2.0mm and 2.5mm hex driver to protect the hex sockets
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1238
- Size: M4 x 10mm
- Head: Button head with 2.5mm hex
- Shank: 2.0mm hex
- Quantity: 8 pieces
- Country of Origin: Taiwan
What's Included
- (8) Tekno RC M4x10mm droop adjustment screws
Fitment
Compatible RC vehicles: Virtually all 1/8 scale vehicles, including Tekno RC platforms, that use an M4 droop adjustment screw.
Summary
- Genuine Tekno RC M4x10mm droop adjustment screws
- Dual-hex design: 2.0mm in the shank, 2.5mm in the head
- Sold as a set of eight
- Fits virtually all 1/8 scale vehicles
