Overview
Tekno RC TKR1322 is a 10-piece pack of M3x8mm black flat head screws. This is one of the most heavily used fasteners in the Tekno range, included with the EB410, EB410.2, EB48 2.0, EB48.2, EB48.3, EB48.4, EB48SL, ET410, ET410.2, ET48, ET48.3, MT410, NB48, NB48 2.0, NB48.3, NB48.4, NT48, NT48.3, SCT410 and SCT410.3 kits.
M3 flat heads carry the structural loads on a Tekno chassis and seat flush in a countersunk hole, keeping surfaces clean and clearance intact. Hex sockets wear over a season, and a rounded head always strips at the worst moment, so a fresh 10-pack is cheap insurance.
Key Features
- Genuine Tekno RC replacement part, item number TKR1322
- M3 thread, 8mm length
- Flat head profile that seats flush in countersunk holes
- Black finish to match Tekno kit hardware
- Supplied in a 10-piece pack
Performance Benefits
- Crisp hex sockets let you reach proper torque without slipping
- Flush seating keeps mounting surfaces clean and clearance intact
- Correct factory length gives full thread engagement without bottoming out
- Fresh fasteners keep chassis and suspension joints tight and rattle-free
Usage Notes
- Check your Tekno kit manual for the locations that call for this size
- Seat the hex driver fully before turning to protect the socket
- Replace any screw with a rounded or dirt-packed hex socket
- Apply thread lock only where the manual specifies it
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1322
- Part: Flat head screws
- Size: M3 x 8 mm
- Head: Flat head, hex socket
- Finish: Black
- Quantity: 10 pieces
- Country of Origin: Taiwan
What's Included
- (10) M3x8mm black flat head screws
Fitment
Compatible RC vehicles: Tekno RC EB410, EB410.2, EB48 2.0, EB48.2, EB48.3, EB48.4, EB48SL, ET410, ET410.2, ET48, ET48.3, MT410, NB48, NB48 2.0, NB48.3, NB48.4, NT48, NT48.3, SCT410 and SCT410.3. These screws are included with those kits and are sold as a replacement part for them; they are not a direct fit for other vehicles.
Summary
- Genuine Tekno RC M3x8mm flat head screws in a 10-piece pack
- Fits a very wide range of Tekno 1/8 and 1/10 scale platforms
- Flush-seating flat head with a clean hex socket
- One of the most useful restock sizes for any Tekno racer
