Overview
Tekno RC TKR1325 is a 10-piece pack of M3x14mm black flat head screws. It is a long-standing size in the Tekno range, supplied with kits across the 1/8 scale 48-series buggies, truggies and monster trucks as well as the 1/10 scale MT410 and SCT410 platforms.
The 14mm length reaches through the deeper stack-ups a chassis uses at bulkheads, braces and mounts. The flat head seats flush in a countersunk hole, keeping mounting surfaces clean and clearance intact.
Key Features
- Genuine Tekno RC replacement part, item number TKR1325
- M3 thread, 14mm length
- Flat head profile that seats flush in countersunk holes
- Black finish to match Tekno kit hardware
- Supplied in a 10-piece pack
Performance Benefits
- Crisp hex sockets let you reach proper torque without slipping
- Flush seating keeps mounting surfaces clean and clearance intact
- Correct factory length gives full thread engagement without bottoming out
- Fresh fasteners keep chassis and suspension joints tight and rattle-free
Usage Notes
- Check your Tekno kit manual for the locations that call for this size
- Seat the hex driver fully before turning to protect the socket
- Replace any screw with a rounded or dirt-packed hex socket
- Apply thread lock only where the manual specifies it
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1325
- Part: Flat head screws
- Size: M3 x 14 mm
- Head: Flat head, hex socket
- Finish: Black
- Quantity: 10 pieces
- Country of Origin: Taiwan
What's Included
- (10) M3x14mm black flat head screws
Fitment
Compatible RC vehicles: Tekno RC kits including the EB48 2.0, EB48 2.2, EB48.2, EB48.3, EB48.4, EB48SL, ET48, ET48 2.2, ET48.3, MT410, MT410 2.0, MT48 2.0, NB48, NB48 2.0, NB48 2.2, NB48.3, NB48.4, NT48, NT48 2.2, NT48.3 and SCT410 2.0. These screws are included with those kits and are sold as a replacement part for them. Check the parts list in your kit manual to confirm this is the size your build uses.
Summary
- Genuine Tekno RC M3x14mm flat head screws in a 10-piece pack
- Fits a wide range of Tekno 1/8 and 1/10 scale platforms
- Flush-seating flat head with a clean hex socket
- A useful longer M3 size to keep in the pit box
