Overview
Item TKR1341 is Tekno RC's short M4x6mm flat head screw, supplied ten to a bag in a black finish. It is the same hardware Tekno includes in a long list of 1/8 and 1/10 kits, from the EB48 and NB48 buggies to the MT410, MT48 2.0 and SCT410 trucks.
M4 flat heads are used where Tekno wants a larger, stronger fastener sitting flush in a countersunk hole. At 6mm they are a short, high-shear screw, and they are exactly the kind of small part that disappears into the carpet mid-build.
Key Features
- M4 x 6mm flat head cap screws with a black finish
- Ten screws per bag
- Factory Tekno RC hardware, item number TKR1341
- Countersunk flat head profile seats flush with the part surface
- Hex drive head for use with standard metric hex drivers
- M4 thread for the higher-load locations across Tekno's 1/8 and 1/10 platforms
Performance Benefits
- Correct Tekno thread size and length, so nothing bottoms out or runs short of thread
- Larger M4 thread resists stripping better than M3 hardware in high-load mounts
- Flush heads keep arms, links and bodywork clear of fastener heads
- Fresh hex sockets grip the driver, so screws can be torqued without rounding out
Usage Notes
- Check your kit manual or exploded view for the locations that call for M4x6mm flat head screws
- Use a correctly sized metric hex driver and seat it fully before turning
- Tighten evenly and avoid overtightening into composite parts
- Replace any screw showing a rounded socket or damaged threads
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1341
- Thread Size: M4
- Length: 6mm
- Head Style: Flat head (countersunk)
- Drive Type: Hex
- Finish: Black
- Material: Steel
- Quantity: 10 screws
- Country of Origin: Taiwan
What's Included
- (10) M4x6mm flat head screws, black
Fitment
Compatible RC vehicles: Tekno RC EB48.2, EB48.3, EB48.4, EB48SL, ET48, ET48.3, NB48, NB48 2.0, NB48 2.2, NB48.4, NT48, MT410, MT410 2.0, MT48 2.0, SCT410, SCT410 2.0 and SCT410.3. This screw is supplied in those kits and is sold as a replacement part for them. Tekno notes that it is not directly compatible with other vehicles, as other models may use different hardware in the same locations.
Summary
- Genuine Tekno RC replacement hardware rather than a generic substitute
- Ten M4x6mm black flat head screws per bag
- Short, high-strength M4 fastener for countersunk, high-load locations
- Fits a wide span of Tekno 1/8 and 1/10 race platforms
