Overview
Item TKR1344 is Tekno RC's M4x12mm flat head screw, supplied ten to a bag in a black finish. It is included across a long run of Tekno platforms, from the EB48 and NB48 buggies and ET48 and NT48 truggies to the MT48 2.0, MT410 and MT410 2.0 monster trucks.
M4 flat heads are used where Tekno needs a larger, stronger fastener that still seats flush in a countersunk hole. At 12mm these screws typically clamp through a part into a mount, so they are worth replacing rather than reusing once the hex starts to round.
Key Features
- M4 x 12mm flat head cap screws with a black finish
- Ten screws per bag
- Factory Tekno RC hardware, item number TKR1344
- Countersunk flat head profile seats flush with the part surface
- Hex drive head for use with standard metric hex drivers
- Used across a wide span of Tekno 1/8 and 1/10 kits
Performance Benefits
- Correct Tekno thread size and length, so nothing bottoms out or runs short of thread
- M4 thread resists stripping better than M3 hardware in higher-load mounts
- Flush heads keep arms, links and bodywork clear of fastener heads
- Fresh hex sockets grip the driver, so screws can be torqued without rounding out
Usage Notes
- Check your kit manual or exploded view for the locations that call for M4x12mm flat head screws
- Use a correctly sized metric hex driver and seat it fully before turning
- Tighten evenly and avoid overtightening into composite parts
- Replace any screw showing a rounded socket or damaged threads
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1344
- Thread Size: M4
- Length: 12mm
- Head Style: Flat head (countersunk)
- Drive Type: Hex
- Finish: Black
- Material: Steel
- Quantity: 10 screws
- Country of Origin: Taiwan
What's Included
- (10) M4x12mm flat head screws, black
Fitment
Compatible RC vehicles: Supplied in Tekno RC kits including the EB48 2.0, EB48 2.1, EB48 2.2, EB48.2, EB48.3, EB48.4, EB48SL, ET48, ET48 2.0, ET48 2.2, ET48.3, NB48, NB48 2.0, NB48 2.1, NB48 2.2, NB48.3, NB48.4, NT48, MT410, MT410 2.0 and MT48 2.0, and sold as a replacement part for them. Tekno hardware is model-specific, so check your kit manual or exploded view to confirm the screw used in the location you are replacing.
Summary
- Genuine Tekno RC replacement hardware rather than a generic substitute
- Ten M4x12mm black flat head screws per bag
- Mid-length M4 countersunk fastener for higher-load mounts
- Fits a wide span of Tekno 1/8 and 1/10 race platforms
