Overview
Item TKR1346 is Tekno RC's M4x15mm flat head screw, supplied ten to a bag in a black finish. It is the factory hardware included in the EB48, NB48, ET48 and NT48 1/8 scale kits as well as the MT48 2.0, MT410 and SCT410 trucks.
A 15mm M4 flat head is a longer, higher-load fastener, so it usually lives in a mount that sees real abuse. Fresh hardware here keeps the assembly clamped properly instead of slowly working loose over a race weekend.
Key Features
- M4 x 15mm flat head cap screws with a black finish
- Ten screws per bag
- Factory Tekno RC hardware, item number TKR1346
- Countersunk flat head profile seats flush with the part surface
- Hex drive head for use with standard metric hex drivers
- Used across a wide span of Tekno 1/8 and 1/10 kits
Performance Benefits
- Correct Tekno thread size and length, so nothing bottoms out or runs short of thread
- M4 thread resists stripping better than M3 hardware in higher-load mounts
- Flush heads keep arms, links and bodywork clear of fastener heads
- Fresh hex sockets grip the driver, so screws can be torqued without rounding out
Usage Notes
- Check your kit manual or exploded view for the locations that call for M4x15mm flat head screws
- Start longer screws by hand so the threads pick up straight
- Use a correctly sized metric hex driver, seat it fully and tighten evenly
- Replace any screw showing a rounded socket or damaged threads
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1346
- Thread Size: M4
- Length: 15mm
- Head Style: Flat head (countersunk)
- Drive Type: Hex
- Finish: Black
- Material: Steel
- Quantity: 10 screws
- Country of Origin: Taiwan
What's Included
- (10) M4x15mm flat head screws, black
Fitment
Compatible RC vehicles: Tekno RC EB48 2.0, EB48 2.2, EB48.2, EB48.3, EB48.4, EB48SL, ET48, ET48 2.2, ET48.3, NB48, NB48 2.0, NB48 2.2, NT48, NT48 2.2, MT410, MT410 2.0, MT48 2.0, SCT410, SCT410 2.0 and SCT410.3. This screw is supplied in those kits and is sold as a replacement part for them. Tekno notes that it is not directly compatible with other vehicles, as other models may use different hardware in the same locations.
Summary
- Genuine Tekno RC replacement hardware rather than a generic substitute
- Ten M4x15mm black flat head screws per bag
- Longer M4 countersunk fastener for high-load mounts
- Fits a wide span of Tekno 1/8 and 1/10 race platforms
