Overview
Item TKR1349 is Tekno RC's M4x20mm flat head screw, supplied ten to a bag in a black finish. It is the factory hardware included in the current-generation 1/8 scale kits: EB48 2.0, 2.1 and 2.2, ET48 2.0 and 2.2, NB48 2.0, 2.1 and 2.2, and NT48 2.0 and 2.2.
A 20mm M4 flat head is one of the longer, higher-load fasteners in a 1/8 car, so it tends to sit in a mount that takes repeated hits. Replacing a tired screw with the correct one keeps the assembly clamped the way Tekno intended.
Key Features
- M4 x 20mm flat head cap screws with a black finish
- Ten screws per bag
- Factory Tekno RC hardware, item number TKR1349
- Countersunk flat head profile seats flush with the part surface
- Hex drive head for use with standard metric hex drivers
Performance Benefits
- Correct Tekno thread size and length, so nothing bottoms out or runs short of thread
- M4 thread resists stripping better than M3 hardware in high-load mounts
- Flush heads keep arms, links and bodywork clear of fastener heads
- Fresh hex sockets grip the driver, so screws can be torqued without rounding out
Usage Notes
- Check your kit manual or exploded view for the locations that call for M4x20mm flat head screws
- Start long screws by hand so the threads pick up straight through the full stack
- Use a correctly sized metric hex driver, seat it fully and tighten evenly
- Replace any screw showing a rounded socket or damaged threads
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1349
- Thread Size: M4
- Length: 20mm
- Head Style: Flat head (countersunk)
- Drive Type: Hex
- Finish: Black
- Material: Steel
- Quantity: 10 screws
- Country of Origin: Taiwan
What's Included
- (10) M4x20mm flat head screws, black
Fitment
Compatible RC vehicles: Tekno RC EB48 2.0, EB48 2.1, EB48 2.2, ET48 2.0, ET48 2.2, NB48 2.0, NB48 2.1, NB48 2.2, NT48 2.0 and NT48 2.2. This screw is supplied in those kits and is sold as a replacement part for them. Tekno notes that it is not directly compatible with other vehicles, as other models may use different hardware in the same locations.
Summary
- Genuine Tekno RC replacement hardware rather than a generic substitute
- Ten M4x20mm black flat head screws per bag
- Long M4 countersunk fastener for high-load 1/8 scale mounts
- Covers the EB48, ET48, NB48 and NT48 2.x platforms
