Overview
Item TKR1401 is Tekno RC's M3x6mm button head screw, supplied ten to a bag in a black finish. It is one of the most widely shared fasteners in the Tekno range, included in the 1/10 EB410 and ET410 kits and across the 1/8 EB48, NB48, ET48 and NT48 families as well as the MT410, MT410 2.0 and MT48 2.0 trucks.
Button head screws use a low domed head with a wide bearing surface, so they clamp well on flat faces where there is no countersink. Because this length turns up in so many places, a bag of spares is one of the most useful things in a pit box.
Key Features
- M3 x 6mm button head cap screws with a black finish
- Ten screws per bag
- Factory Tekno RC hardware, item number TKR1401
- Low-profile domed head with a broad bearing surface
- Hex drive head for use with standard metric hex drivers
- Shared across Tekno's 1/8 and 1/10 platforms
Performance Benefits
- Correct Tekno thread size and length, so the screw does not bottom out or protrude
- Wide head spreads clamping load on flat, non-countersunk surfaces
- Low head height keeps clearance around arms, links and bodywork
- Fresh hex sockets grip the driver, so screws can be torqued without rounding out
Usage Notes
- Check your kit manual or exploded view for the locations that call for M3x6mm button head screws
- Use a correctly sized metric hex driver and seat it fully before turning
- Tighten evenly and avoid overtightening into composite parts
- Replace any screw showing a rounded socket or damaged threads
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1401
- Thread Size: M3
- Length: 6mm
- Head Style: Button head
- Drive Type: Hex
- Finish: Black
- Material: Steel
- Quantity: 10 screws
- Country of Origin: Taiwan
What's Included
- (10) M3x6mm button head screws, black
Fitment
Compatible RC vehicles: Supplied in Tekno RC kits including the EB410, EB410.2, ET410, ET410.2, EB48 2.0, EB48 2.2, EB48.2, EB48.3, EB48.4, ET48, ET48 2.2, ET48.3, NB48, NB48 2.0, NB48 2.2, NB48.3, NB48.4, NT48, MT410, MT410 2.0 and MT48 2.0, and sold as a replacement part for them. Tekno hardware is model-specific, so check your kit manual or exploded view to confirm the screw used in the location you are replacing.
Summary
- Genuine Tekno RC replacement hardware rather than a generic substitute
- Ten M3x6mm black button head screws per bag
- One of Tekno's most commonly used button head fasteners
- Fits a wide span of Tekno 1/8 and 1/10 race platforms
