Overview
Item TKR1402 is Tekno RC's M3x8mm button head screw, supplied ten to a bag in a black finish. Like the shorter M3 button heads, it is shared across most of the Tekno range, from the 1/10 EB410 and ET410 kits to the 1/8 EB48, NB48, ET48 and NT48 families and the MT410 truck.
Button head screws use a low domed head with a wide bearing surface, so they clamp well on flat faces where there is no countersink. An 8mm M3 is the general-purpose length that shows up in mounts, braces and covers all over the car.
Key Features
- M3 x 8mm button head cap screws with a black finish
- Ten screws per bag
- Factory Tekno RC hardware, item number TKR1402
- Low-profile domed head with a broad bearing surface
- Hex drive head for use with standard metric hex drivers
- Shared across Tekno's 1/8 and 1/10 platforms
Performance Benefits
- Correct Tekno thread size and length, so the screw does not bottom out or protrude
- Wide head spreads clamping load on flat, non-countersunk surfaces
- Low head height keeps clearance around arms, links and bodywork
- Fresh hex sockets grip the driver, so screws can be torqued without rounding out
Usage Notes
- Check your kit manual or exploded view for the locations that call for M3x8mm button head screws
- Use a correctly sized metric hex driver and seat it fully before turning
- Tighten evenly and avoid overtightening into composite parts
- Replace any screw showing a rounded socket or damaged threads
Technical Specs
- Brand: Tekno RC
- Item No.: TKR1402
- Thread Size: M3
- Length: 8mm
- Head Style: Button head
- Drive Type: Hex
- Finish: Black
- Material: Steel
- Quantity: 10 screws
- Country of Origin: Taiwan
What's Included
- (10) M3x8mm button head screws, black
Fitment
Compatible RC vehicles: Supplied in Tekno RC kits including the EB410, EB410.2, ET410, ET410.2, EB48 2.0, EB48 2.2, EB48.2, EB48.3, EB48.4, EB48SL, ET48, ET48 2.2, ET48.3, NB48, NB48 2.0, NB48 2.2, NB48.3, NB48.4, NT48, NT48 2.2, NT48.3 and MT410, and sold as a replacement part for them. Tekno hardware is model-specific, so check your kit manual or exploded view to confirm the screw used in the location you are replacing.
Summary
- Genuine Tekno RC replacement hardware rather than a generic substitute
- Ten M3x8mm black button head screws per bag
- General-purpose M3 button head length used throughout Tekno's kits
- Fits a wide span of Tekno 1/8 and 1/10 race platforms
