Overview
This Tekno RC front shock spring set (orange) is wound from 1.6mm wire with 7.5 turns for a rate of 6.11 lb/in and a free length of 80mm. It is a genuine Tekno RC tuning spring for the ET48/MT410/NT48 platforms, letting you fine tune how the chassis handles bumps, jumps and weight transfer.
Spring rate is one of the quickest and most effective suspension adjustments you can make. Tekno RC color codes its springs so you can identify each rate at a glance in the pits, and keeping a few rates on hand lets you match the setup to track grip and layout.
Key Features
- Genuine Tekno RC front shock spring set
- 1.6mm wire with 7.5 turns
- Rated at 6.11 lb/in
- 80mm free length
- Orange color coding for easy identification
Performance Benefits
- A stiffer spring adds support and reduces chassis roll in high grip conditions
- A softer spring adds weight transfer and grip on loose or bumpy tracks
- Matched springs keep handling consistent side to side
- Fresh springs restore ride height lost to sagged, fatigued springs
Usage Notes
- Always change springs in pairs on the same axle
- Reset ride height with the spring collars after any spring change
- Change one setting at a time and note the result on track
- Check your Tekno RC manual or setup sheet for the stock spring and shock length
Technical Specs
- Brand: Tekno RC
- Item No.: TKR6093
- Type: Front shock spring set
- Wire diameter: 1.6mm
- Turns: 7.5
- Spring rate: 6.11 lb/in
- Free length: 80mm
- Color: Orange
- Scale: 1/8 and 1/10
- Country of Origin: Taiwan
What's Included
- (1) Tekno RC orange shock spring set as packaged by Tekno RC
Fitment
Compatible RC vehicles: Tekno RC ET48, ET48 2.0, ET48 2.2 and ET48.3 (1/8 electric truggy); MT410 (1/10 4x4 monster truck); NT48, NT48 2.0 and NT48.3 (1/8 nitro truggy).
Summary
- Genuine Tekno RC 1.6 x 7.5T orange shock springs, 6.11 lb/in
- Direct fit for the ET48/MT410/NT48 vehicles listed under Fitment
- Quick, effective suspension tuning option
- Color coded for easy identification in the pits
