Overview
When installing the TKR9416B -2mm bulkhead, these Tekno RC bulkhead covers must be used to provide more ring gear clearance than the stock TKR9017 covers. They are open to the bottom for ring gear clearance and fit the chassis cutout precisely to seal the bulkhead.
The sway bar collars are the same as those supplied with TKR9017. This set is included with the latest Tekno RC 1/8 2.2 kits and the MT410 2.0.
Key Features
- Open-bottom design for ring gear clearance
- Precise fit in the chassis cutout
- Required with the TKR9416B -2mm bulkhead
- Includes the same sway bar collars as TKR9017
Performance Benefits
- Allows lower bulkhead positions without gear interference
- Helps keep dirt out of the gearbox
- Protects ring and pinion gears from debris
Usage Notes
- Apply a thin layer of grease between the cover and chassis to keep dust away from the gears
- Recommended with TKR9416B gearbox, TKR9054B rear hubs and TKR9284B rear arms
- Follow your Tekno RC manual for installation
Technical Specs
- Brand: Tekno RC
- Item No.: TKR9017B
- Type: Sway bar and bulkhead accessories
- For: -2mm and -4mm bulkheads
- Scale: 1/8
- Country of Origin: Taiwan
What's Included
- (1) Tekno RC sway bar and bulkhead accessory set
Fitment
Compatible RC vehicles: Tekno RC EB48 2.2, ET48 2.2, NB48 2.2, NT48 2.2, MT48 2.0 and MT410 2.0 (included in these kits), plus EB48 2.1, ET48 2.0, NB48 2.1 and NT48 2.0 as a direct replacement or new feature. Check your kit manual to confirm the part number before ordering.
Summary
- Open-bottom bulkhead covers for -2/-4mm bulkheads
- Required with TKR9416B for ring gear clearance
- Fits Tekno RC 1/8 2.x kits and MT410 2.0
