Overview
Improve the handling of your Tekno RC EB48 and NB48 2.x vehicles with these +/-2mm rear hubs, supplied with bearing spacers for left and right sides.
During testing, Tekno RC's drivers discovered that the -2mm position (the hole closest to the bearing) increased rear end grip, stability and predictability on all track conditions.
Key Features
- +/-2mm rear hub design
- Adjustable roll center
- Left and right hubs with bearing spacers
- For EB48 and NB48 2.x
Performance Benefits
- Increased rear grip and stability in the -2mm position
- More predictable handling on all track conditions
- Extra tuning range compared with standard hubs
Usage Notes
- Start with the -2mm position (closest hole to the bearing) as tested by Tekno RC drivers
- Set both sides to the same position
- Check the rear axles spin freely after assembly
- Refer to your Tekno RC manual for exact placement and orientation
- Use a quality hex driver and apply thread lock only where metal-to-metal threads require it
Technical Specs
- Brand: Tekno RC
- Item No.: TKR9054B
- Offset: +/-2mm
- Feature: Adjustable roll center
- Position: Rear, left/right
- Fits: Tekno RC EB48 / NB48 2.x
- Scale: 1/8
- Country of Origin: Taiwan
What's Included
- (1) Set of +/-2mm rear hubs (L/R)
- (1) Set of bearing spacers
Fitment
Compatible RC vehicles: Tekno RC EB48 2.x 1/8 electric buggy and NB48 2.x 1/8 nitro buggy
Summary
- +/-2mm adjustable roll center rear hubs
- -2mm position adds rear grip and stability
- For EB48 and NB48 2.x buggies
- Includes bearing spacers
